A NetBird exit node with a dedicated static IP

Keep your NetBird network, cloud or self-hosted, and add GetAStatic's exit node as a routing peer for $5/mo per IP address, on top of a plan from $4/mo. Devices that use it reach the internet from your own dedicated IPv4. You rent no VPS and patch no server.

GetAStatic is not affiliated with NetBird. NetBird steps from NetBird's own docs, checked 2026-11-02.

Instant setup US-based IP

Updated

Facts

The add-on at a glance

Price$5/moPer IP address, billed with that IP's renewal. The first charge is prorated from your credit balance.
In your networkOne routing peer, named after your IP, for example getastatic-203-0-113-10
NetBirdNetBird Cloud, or your self-hosted management server
Your partA setup key, and one exit node route in your NetBird dashboard
RemovalOne link in the dashboard. Unused time goes back to your credit balance.
The problem

A NetBird exit node needs a server you run

NetBird can send a device's internet traffic through another peer in your network: a routing peer with a default route (0.0.0.0/0), which NetBird calls an exit node. Websites then see the public IP of that routing peer, not the IP of the network you are on.

NetBird does not supply the routing peer. A machine at home gives you your home IP, which can change, and the exit node stops when the machine sleeps. A VPS gives you a fixed IP, but you rent it, install NetBird on it, keep it patched and keep it online, all for one outbound address.

Your own static IP over WireGuard. No VPS.

Dedicated IPv4 from $4/mo →
Why use GetAStatic?

What the NetBird exit node is for

  • One fixed outbound IPv4 for the NetBird peers you choose, with no VPS to rent, harden or patch
  • Sign in to allowlisted work systems, databases and admin panels from the same IP every time
  • Keep one US IP for bank, email and account logins while you travel
  • Choose who uses it: the route's distribution groups decide, and users can turn it off in the NetBird menu
  • Works the same with NetBird Cloud and with a self-hosted management server
How it works

We run the routing peer; your dedicated IP is its address

The add-on adds one peer to your NetBird network. It runs the official NetBird agent in an isolated container on our host and registers with a setup key that you create. On a self-hosted NetBird, you also give us your management URL. The peer appears with a name made from your IP, for example getastatic-203-0-113-10.

You create the exit node route in your own NetBird dashboard, so you decide which groups use it. The peer sends exit traffic through its own WireGuard device on your static IP, and that traffic counts against that IP's plan. The setup key only registers the peer: it gives us no access to your dashboard, groups or policies. Your devices keep the standard NetBird app and nothing else.

Setup

Set up the NetBird exit node

You need admin rights in NetBird for the setup key and the route. Step-by-step detail: the NetBird setup guide.

  1. Choose a plan. Your static IP shows in the dashboard.
  2. Create a setup key. In the NetBird dashboard, open Settings, then Setup Keys, and select Create Setup Key. A one-off key is enough. Leave Ephemeral Peers off.
  3. Add the exit node. In the dashboard, open the My IPs tab and click IP settings on your IP. In the Exit node row, click Unlock, choose NetBird and paste the setup key. On a self-hosted NetBird, also enter your management URL. We use the key once and do not store it.
  4. Wait for setup. The row shows Setting up… for a few minutes. Then a new peer, such as getastatic-203-0-113-10, appears on the Peers page in NetBird.
  5. Make it the exit node. On the Peers page, open the new peer and select Add Exit Node. Choose the distribution groups whose devices may use it, and confirm. On a dashboard without that button, add a route under Network Routes instead: network range 0.0.0.0/0, the new peer as routing peer, and your groups.
  6. Use it on your devices. With Auto Apply on (the default), devices in those groups use the exit node right away. With it off, each user selects the exit node in the NetBird menu. That device now reaches the internet from your static IP.
Good to know

Good to know

  • Exit traffic counts against your static IP's plan: the same speed cap and the same data quota.
  • The address is a datacenter IP, not a residential one.
  • Each IP address takes one exit node. For a second exit node, add another IP address.
  • If the tunnel to your static IP drops, the exit node blocks the traffic. It never sends it out from another address.
  • NetBird keeps the exit node selected on a device while it is offline, so that device has no internet until the exit node is back or you turn it off in the NetBird menu.
  • Built for a stable address, not anonymity: the IP your devices connect from is logged.
Pricing

Choose your plan

Plus for light use, Pro for most people, Ultra for full gigabit.

Plus
$4/mo

 

  • 1 dedicated IP address
  • 2 devices
  • 5 open ports
  • 1 TBmonthly bandwidth
  • 50 Mbpsspeed

No commitment · Cancel anytime

Ultra
$10/mo

 

  • 2 dedicated IP addresses
  • 20 devices
  • Unlimited open ports
  • 5 TBmonthly bandwidth
  • 1 Gbpsspeed

No commitment · Cancel anytime

Unlimited
Need unlimited data?
  • 100 Mbpsspeed
  • Unlimitedbandwidth
  • 1 dedicated IP address
$15/mo
  • Inbound + outbound access
  • Instant activation
  • 30-day money-back guarantee
  • No annual commitment
  • Your price never goes up
FAQ

Questions, answered.

01Does it work with self-hosted NetBird?

Yes. Enter your management URL with the setup key, for example https://netbird.example.com: the same URL your devices use. Our peer connects to it over the internet, like your own devices do when they are away from home, so a URL that works only on your LAN cannot work. With NetBird Cloud, leave the URL empty.

02What do you see?

The exit node sends your devices' internet traffic out from your static IP, and the IP your devices connect from is logged. GetAStatic is built for a stable address, not anonymity. The setup key adds one peer to your network. It gives us no access to your NetBird dashboard, and your access policies apply to our peer like to any other.

03How fast is the exit node?

As fast as your plan: 50 Mbps on Plus, 100 Mbps on Pro and 1 Gbps on Ultra. If NetBird relays a device's connection instead of connecting it directly, that device can see lower speed.

04Which setup key should I create?

A one-off key works, and so does a reusable one. Leave Ephemeral Peers off: NetBird removes an ephemeral peer after it is offline for more than 10 minutes, and we cannot register it again without a new key. If the key is rejected, the dashboard row shows the error and a Retry with a new key link, with no extra charge.

05Do I need to install anything on my devices?

No. Your devices run only the NetBird app. The WireGuard tunnel to your static IP runs on our side, inside the exit node peer, so phones and laptops need no second VPN app.

Have more questions? See the full FAQ →