Set up a NetBird exit node on your static IP

Add our exit node to your NetBird network as a routing peer, create its exit node route, and check that your devices reach the internet from your static IP.

GetAStatic is not affiliated with NetBird. The NetBird steps follow NetBird's own docs. Overview and price: NetBird exit node.

Before you start

  • An active GetAStatic plan. The exit node is an add-on for $5/mo per IP address.
  • A NetBird account that may create setup keys and routes, such as an admin. It works with NetBird Cloud and with a self-hosted NetBird.
  • On a self-hosted NetBird: your management URL, the address your devices use with --management-url, for example https://netbird.example.com. Our peer connects to it over the internet, so it must be reachable from outside your network.
  • NetBird 0.27.0 or newer on your devices. Auto Apply, which turns the exit node on by itself, needs 0.55.0 or newer on the device.

Create a setup key

  1. Open Setup Keys

    In the NetBird dashboard, open Settings, then Setup Keys, and select Create Key.

    NetBird dashboard, Settings, Setup Keys: the Create Key button
  2. Choose the options

    • Name: anything, for example getastatic.
    • One-off is enough: we use the key once. The default expiry is fine.
    • Leave Ephemeral Peers off. NetBird removes an ephemeral peer after it is offline for more than 10 minutes, and we cannot register it again without a new key.
    • Optional: auto-assign a group, such as exit-nodes, if your access policies work by group.
    Create New Setup Key dialog: Name getastatic, reusable off, Ephemeral Peers off, the Create Setup Key button
  3. Copy the key

    Select Create Setup Key and copy the key.

Add the exit node in your GetAStatic dashboard

  1. Paste the key

    Sign in to your dashboard. On the My IPs tab, select the IP that the exit node will use and click IP settings. In the Exit node row, click Unlock, choose NetBird and paste the setup key.

    On a self-hosted NetBird, also enter your management URL. On NetBird Cloud, leave it empty. Confirm. The first charge is prorated from your credit balance. We use the key once and do not store it.

    Dashboard, Add an exit node? dialog: NetBird chosen, the setup key and management URL fields
  2. Wait for the peer

    The row shows Setting up… for a few minutes. Then a new peer, such as getastatic-203-0-113-10, shows as online on the Peers page in NetBird. If it waits there for approval, approve it.

    NetBird Peers page: the getastatic peer online

Create the exit node route

We do not change your NetBird settings. You create the route that makes our peer the exit node, so you decide which devices use it.

  1. Add the exit node to the peer

    On the Peers page, open the getastatic-203-0-113-10 peer and select Add Exit Node.

    • Distribution groups: the groups whose devices may use the exit node, for example All or a group of your laptops.
    • Auto Apply Route (Additional Settings tab): on (the default), devices in those groups use the exit node right away. Off, each user selects it in the NetBird menu.

    Select Continue through the tabs, then Add Exit Node.

    NetBird Add Exit Node dialog on the getastatic peer: Distribution Groups All, the Continue button
  2. Or: add it as a network route

    On a NetBird dashboard without the Add Exit Node button, open Network Routes and select Add Route:

    • Network range: 0.0.0.0/0
    • Routing peer: getastatic-203-0-113-10
    • Distribution groups: the groups that may use it
    • Make sure the route is enabled, then save it.
    NetBird Create New Route dialog: Network Range 0.0.0.0/0, the getastatic peer as routing peer
  3. Check your access policies

    Devices in the distribution groups need a connection to the routing peer. If you replaced NetBird's default access policy with your own, add a policy that lets those groups connect to the getastatic-203-0-113-10 peer.

Check it works

  1. Turn it on on a device

    With Auto Apply on, there is nothing to do. Otherwise, open the NetBird menu on the device, go to Exit Node and select getastatic-203-0-113-10. In a terminal, netbird routes list shows the exit node route as Selected.

    NetBird tray menu, Exit Node: the getastatic peer checked
  2. Check the IP

    On that device, open an IP check site, such as our connection check. It must show the static IP from your dashboard. From a terminal:

    curl -4 https://getastatic.com/api/tools/ip
    Port checker page on a NetBird device: Your public IPv4 shows the static IP

If it does not work

  • NetBird did not accept the setup key: the key was already used, expired or was revoked, or the management URL is wrong. Create a new key, then select Retry with a new key in the Exit node row. A retry costs nothing extra.
  • The peer never shows up on a self-hosted NetBird: check the management URL, with https://, and check that it is reachable from outside your network, for example from a phone on mobile data.
  • No internet after you turn on the exit node: check that the getastatic-203-0-113-10 peer is online on the Peers page, that the device is in one of the route's distribution groups, and that an access policy lets it connect to the peer. To get back online meanwhile, turn the exit node off in the NetBird menu.
  • Kill switch: the exit node never sends your traffic out from another address. If its tunnel to your static IP is down, it drops the traffic. NetBird keeps the exit node selected on a device while it is offline, so that device has no internet until the exit node is back or you turn it off in the NetBird menu.
  • Exit nodes are temporarily unavailable: our exit node host is full. We email you when a slot opens.

Still stuck? Ask on the Support tab of your dashboard, and include the output of netbird status -d from the device. Do not send a setup key that is still valid. NetBird's own guide: Exit nodes.